User Tools

Site Tools


tutorials:making_a_filament_pulley_or_hobbed_bolt

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
tutorials:making_a_filament_pulley_or_hobbed_bolt [2014/07/14 01:23]
ashley
tutorials:making_a_filament_pulley_or_hobbed_bolt [2014/07/14 05:14] (current)
ashley
Line 7: Line 7:
 >> Insert Dan's pictures << >> Insert Dan's pictures <<
  
-Next, we placed the bolt into the [[http://​www.thingiverse.com/​thing:​1802|hobbing jig]] held in the mill's vice, and turned a 1/4" tap against it to cut the teeth. We produced ​one excellent bolt (the short one to be used for an Ultimaker), and two possibly usable bolts for the Tantillus.+Next, we placed the bolt into the [[http://​www.thingiverse.com/​thing:​1802|hobbing jig]] held in the mill's vice, and turned a 1/4" tap against it to cut the teeth. We produced ​three (hopefully) usable bolts, ​one for an Ultimaker and two for the Tantillus.
  
 {{:​tutorials:​img_20140712_175037.jpg?​300|}} {{:​tutorials:​img_20140712_175037.jpg?​300|}}
tutorials/making_a_filament_pulley_or_hobbed_bolt.txt ยท Last modified: 2014/07/14 05:14 by ashley