User Tools

Site Tools


tool:laser_cutter:operation_manual

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
tool:laser_cutter:operation_manual [2014/07/26 19:42]
jarrett
tool:laser_cutter:operation_manual [2015/03/30 01:40] (current)
garthomite
Line 10: Line 10:
   * **Only** use materials on the Approved Materials List. If something you want to cut is not on the list, ask a member of the Laser Cutter Committee *first*. Most likely if it's not on the list, it is *TOXIC* or *CORROSIVE*!   * **Only** use materials on the Approved Materials List. If something you want to cut is not on the list, ask a member of the Laser Cutter Committee *first*. Most likely if it's not on the list, it is *TOXIC* or *CORROSIVE*!
   * **Do not** operate when the lid or any hatches are open.   * **Do not** operate when the lid or any hatches are open.
-  * **No alcohol** ​in the laser cutter ​roomand do not use the laser cutter after drinking. +  * **No alcohol** ​near the laser cutter, do not use the laser cutter after drinking. 
-  * **Do not** leave the laser cutter ​room at any time while the laser cutter is in operation, for any reason. It must be carefully observed to mitigate and suppress fires, which are a frequent occurrence.+  * **Do not** leave the laser cutter at any time while the laser cutter is in operation, for any reason. It must be carefully observed to mitigate and suppress fires, which are a frequent occurrence.
   * **Do not** attempt to use materials that may splutter or explode (e.g. anything with high water content).   * **Do not** attempt to use materials that may splutter or explode (e.g. anything with high water content).
   * **Do not** use for scarification or laser tattoos.   * **Do not** use for scarification or laser tattoos.
-  * **Do not** attempt any repairs, calibration,​ or maintenence ​of the laser cutter under any circumstances! The laser cutter is not treated like the other tools at VHS in this manner. **The laser cutter is not a do-ocracy.**+  * **Do not** attempt any repairs, calibration,​ or maintenance ​of the laser cutter under any circumstances! The laser cutter is not treated like the other tools at VHS in this manner. **The laser cutter is not a do-ocracy.**
   * **Do not** use the Emergency Stop button to power-off the laser cutter in non-emergency situations.   * **Do not** use the Emergency Stop button to power-off the laser cutter in non-emergency situations.
   * **Do not** use more heat (a combination of power and speed) than is necessary to accomplish a cut or etch.   * **Do not** use more heat (a combination of power and speed) than is necessary to accomplish a cut or etch.
tool/laser_cutter/operation_manual.1406403753.txt.gz · Last modified: 2014/07/26 19:42 by jarrett