Frequently Asked Questions
This is an old revision of the document!
Summary description of the tool and perhaps some misc notes about it's existence!
|Status||Operational as of November 2013|
|Usage Restrictions||Members Only|
|Owner||(VHS or Name of proper owner)|
|If it Breaks||(Panic procedure, usually involving emailing list and “broken” sign)|
|Arrival Date||November 2013|
|Location||(Location within VHS, eg Workshop|
|Champion||See Compendium of Champions|
THERE IS NO BELT GUARD FOR THE TOP OF THE MILL. ONE NEEDS TO BE FABRICATED
Always wear eye protection while using the mill. Do not use the mill if you do not know how to use this type of machine. If used improperly; workpieces of pieces of cutting tools can be thrown around the shop at high velocity.
Mill is a Long Chang LC-15A. No specifications for this mill appear to be available online. The following information was measured from the mill and may be inaccurate.
Spindle Taper: Measured ~3.215in long, 0.8in minor diameter, 0.95in major diameter. Very close to Morse #3
Table: 1/2in T slots
To move mill head up and down (major vertical adjustment); you need to loosen two bolts on the right-hand-side of the head, and use the crank on the left-hand-side of the mill to raise or lower. Retighten securing bolts before use (when untightened, crank has huge slop).
X/Y - handwheels on table Z - large grab handle on right of mill, or handwheel on front of mill. Black locking ring on grab-handle on right of mill engages/disengages handwheel. This axis can be locked via the small black lever on the front-left of the mill head.
- 1/4, 3/8, 1/2in collets - Drill Chuck - (many more)
A written tutorial won't suffice! Don't touch the machine unless you've received training or used similar equipment!
|Wiki entry created||Nov 20, 2013||Thomas L.|