User Tools

Site Tools


laser_cutter_settings

This is an old revision of the document!


Laser Cutter Awesomeness Ingredients!

Behaviour Description
Cut Mode=Cut in software, will pierce material
Etch Mode=Cut in software, will mark material
Raster Mode=Etch in software, will mark material

Banned Materials

Material Reason
Lexan/Polycarbonate Toxic and corrosive fumes
PVC Toxic and corrosive fumes - chlorine gas (yes, REALLY)
Foam core Toxic and corrosive fumes - made from PVC, so chlorine gas

Successful Settings

* - Please avoid the use of woods currently. We're re-evaluating their use due to substantial residue being left on the laser cutter.

Material Mode Speed Power Corner Power Passes Notes
Card Stock Etch 35 10 10 1 N/A
Card Stock Cut 35 35 25 1 N/A
Card Stock Raster ??? ??? ??? ? N/A
Acrylic - 1/4” Cut 7 55 55 1 N/A
Acrylic - 1/16” Cut 7 100 100 1 N/A
Acrylic - 1/16” Cut 55 100 100 1 This will etch fast without cutting
Acrylic - 1/16” Cut 25 25 25 1 This will etch fast without cutting (same as the 55x100x100 better on coners)
* Wood (Hardboard 1/8”) Etch 200 15 15 1 N/A
* Wood (Hardboard 1/8”) Cut 7 100 100 1 N/A
* Wood (Hardboard 1/8”) Cut 10 100 100 1 This worked but just barely. I would suggest using 7 speed instead.
* Wood (Hardboard 1/8”) Cut 40 100 100 1 This will etch fast without cutting.
* Wood (Hardboard 1/8”) Cut 4.2 80 80 1 Works Well (Loial) Extra Note: Some flames while cutting, nothing lasting past the cut location
* Wood (Hardboard 1/8”) Cut 80 20 20 1 Fast Etch (Loial)
Leather Cut 50 35 100 1 Leather from Dressew scrap bin (Paul)
Polypropylene (0.75mm) Cut 30 50 45 1 From Yoko-yaya, ideal for stencils (John)
Plywood 1/4” Birch Cut 40 50 45 2 From Home Depot ~$50 for 8'x4'

Failed Settings

Material Mode Speed Power Corner Power Passes Notes
Acrylic - 1/16” Cut 25 15 15 1 Trying to etch with the cut setting. The outline is visible but not great.
laser_cutter_settings.1353167006.txt.gz · Last modified: 2012/11/17 15:43 by johncraver