This week we’re building Logic Pirate open hardware logic analysers at VHS in our SMD workshops.  The ICSP header is 0.05″ pitch so I came up with a top and bottom programming jig to load the initial firmware.  Tickets are closed, if there is demand we’ll re-run the workshop later this year.

The LP is currently OOS at Seeed (http://www.seeedstudio.com/depot/Logic-Pirate-p-1750.html), I’m selling the extra PCBs on Tindie (https://www.tindie.com/products/TomKeddie/logic-pirate-dangerous-prototypes-pcb-only).

The doco page on the LP is at http://dangerousprototypes.com/docs/Logic_Pirate. As above you need a pickit to program the initial bootloader and firmware image. The hex file can be found at http://dangerous-prototypes-open-hardware.googlecode.com/svn/trunk/Logic_Pirate/AN1388_Source_Code_V2012_10_05/PIC32_Bootloaders/Firmware/logic_pirate_combined_2013-06-25.hex.

The Mouser project is at http://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=0a63fc5366