vhs

map

bruce — 2013-05-21T19:48:30+00:00

270 1st Ave E There is a door down a set of stairs from the back alley, or a level loading bay entrance (wheelchair accessible) from the street. We are a ten minute walk from the Main St / Science World skytrain station, we're on a Vancouver bicycle route, and street parking is available for cars as well as a parking lot beside the building that may be available evenings and weekends. Parking lot rules aren't yet nailed down (or if they are, edit this page).

closing_the_space

i-make-robots — 2013-05-21T04:25:06+00:00

When closing the space, please remember to: * put any dishes in the sink. Bonus points for washing up. * sweep junk from the tables onto the floor. * sweep floor into the garbage/recycling. * Close the roller door and make sure it's locked. * with the front door closed, enter the alarm code to arm the alarm (the Alarm LED will go red and it'll start beeping) * turn off the main lights * leave and lock the front door as per the instructions at schalge_lock_instructions

start - non-spam version restored

johnc — 2013-05-20T19:41:18+00:00

This is the Vancouver Hack Space Wiki. DOWN WITH BETAMAX! VHS provides a physical space where hackers, computer geeks, engineers, circuit benders, crafters, and other creative types can gather to share ideas, equipment, opinions, and beer. We aim to create a sort of 24/7 brain gym, where members can show up and work on personal projects, consult with friends, and learn new tricks. More than just a studio space, we focus on sharing all sorts of knowledge within a friendly and collaborative…

opening_the_space

tomkeddie — 2013-05-19T13:43:17+00:00

When opening the space, please remember to do the following: * Unlock the front door using the PIN code (instructions at schalge_lock_instructions) * Disarm the alarm using the alarm code (The Alarm LED should turn off) * Turn on the lights

schalge_lock_instructions - created

tomkeddie — 2013-05-19T13:34:05+00:00

[Schlage Lock Instructions]

doorlock.jpg

tomkeddie — 2013-05-19T13:33:45+00:00

horizontal_bandsaw - created

rsim — 2013-05-19T09:06:30+00:00

* owner = Richard Sim * user certification required = Tool certification doesn't exist yet. * hackable = No * model = * serial # = * arrived = November 2012 * does it work? = Yes * if it breaks = Unplug machine, put a “broken” sign on machine, contact Richard. * contact = Richard Sim * where = Danger Zone * value = $300

equipment_and_tools

rsim — 2013-05-19T09:03:34+00:00

Please put this information at the top of each equipment page! owner = Vancouver Hack Space\\ user certification required = YES OR NO\\ hackable = YES OR NO\\ model = MODEL NUMBER\\ serial = SERIAL NUMBER\\ arrived = DATE\\ doesitwork = WORKING OR BROKEN\\ if it breaks = WHAT TO DO\\ contact = NAME OF CONTACT PERSON\\ where = LOCATION\\ value = DOLLARS\\

grizzly_x3_4-axis_cnc_mill

rsim — 2013-05-19T09:02:48+00:00

owner = Richard Sim user certification required = YES hackable = NO model = Grizzly G0463 (a Seig X3) serial = something arrived = Late November 2012 doesitwork = WORKING if it breaks = Let Richard know, put up an Out of Order sign contact = Richard Sim where = Danger Zone value = $lots

view_from_104_000_feet.jpg

fishboy — 2013-02-12T03:30:45+00:00

nearspace.jpg

fishboy — 2013-02-12T03:29:45+00:00

nokia.jpg

admin — 2012-08-03T17:06:57+00:00

andrew_facecast2.jpg

abucior — 2012-07-19T17:13:10+00:00

andrew_facecast.jpg

abucior — 2012-07-19T17:05:46+00:00

cast_lips.jpg

butters — 2012-07-13T16:04:19+00:00

cast_eye.jpg

butters — 2012-07-13T16:04:13+00:00

cast_face.jpg

butters — 2012-07-13T16:04:06+00:00

cast_01.jpg

butters — 2012-07-13T16:03:57+00:00

cast2result.jpg

abucior — 2012-07-04T16:41:25+00:00

cast2demold.jpg

abucior — 2012-07-04T16:41:18+00:00