This is an old revision of the document!
owner = Vancouver Hack Space
user certification required = YES (see below)
hackable = NO
arrived = March 30, 2012
doesitwork = WORKING - Setup and testing in progress
if it breaks = Turn off main power, leave water cooler running for 5 minutes and then shut off the Master Power and unplug. Put a BROKEN sign on machine. Notify Members list and Laser Cutter Committee immediately.
contact = Richard Sim or any Laser Cutter Committee member
where = Laser Room
value = $3500 + ~$1000 to get it here and set up
Anyone who wishes to use the laser cutter must be both a VHS member, and have completed a laser cutter training class (class dates are announced on the members' mailing list)
If you are planning to take a class, please first read through the operation manual. http://vancouver.hackspace.ca/doku.php?id=laser_cutter_operation_manual