User Tools

Site Tools


laser_cutter_workflow_tips

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

laser_cutter_workflow_tips [2013/03/18 04:29]
i-make-robots
— (current)
Line 1: Line 1:
-==== General Software Usage ==== 
-[[laser_cutter_operation_manual#​software|Software in the Laser Cutter Operation Manual]] 
- 
-==== Scale Issues ==== 
-DXF has no concept of scale, and you have to select a scale when you //export// DXFs. The laser software (EasyCut) assumes a millimetre scale. In other words, a DXF will contain a unit-less dimension of 1.0; and that could be 1 inch, 1 metre, 1 foot, or 1 millimetre for all the DXF format and/or reading software knows. No scale issues have been seen when using MM for export from various CAD packages. 
- 
-==== Online tools ==== 
- 
-[[http://​www.frag-den-spatz.de/​index.php?​menue=/​boxdesigner/​menue.htm&​page=/​boxdesigner/​fingerbox.html|Box Generator]] generates arbitrary finger jointed boxes in SVG format. ​ Use Corel to convert the SVG to DXF. 
- 
-==== FURTHER INFORMATION ==== 
-  * [[http://​www.marginallyclever.com/​blog/​2013/​02/​three-secrets-to-better-results-on-a-redsail-laser-cutter/​|3 secrets to better results]] 
-  * [[Aligning the final stage of the Redsail Laser Cutter]] 
-  * [[RedSail_CM1080_Laser_Cutter|RedSail CM1080 Laser Cutter specifications]] 
-  * [[laser_cutter_operation_manual|Laser Cutter Operation Manual]] 
-  * [[laser_cutter_settings|Materials and Settings Chart]] 
  
laser_cutter_workflow_tips.1363580984.txt.gz ยท Last modified: 2013/03/18 04:29 by i-make-robots