User Tools

Site Tools


Soldering Bench

Summary description of the area and perhaps some misc notes about it's purpose!

Status Operational as of Nov 20, 2013
Training Recommended
Usage Restrictions Anyone
Creation Date VHS Epoch
Location Main area
Champion See Compendium of Champions


This should outline safety concerns and guidelines for the area and it's tools / operation.


Detailed specifications and references to information describing the area and it's purpose, sub categories for it's relevant tools. Strive for comprehensive!


Instructions on how to use the area and/or it's tools or links to references, pdf guide or something. This should be a solid basis for any required training.


1) Return all pliers, cutters, soldering pumps, etc to the appropriate bins (far left, look up)

2) Return solder coils, braid, and flux to solder bin or just in front of the bin on the shelf.

3) Push all equipment back towards the wall, coil up any cables neatly and tuck them away. The only thing in the work area should the soldering iron and perhaps a helping hand or two.

4) Use the handbrush and dustpan (hung up by the IC storage area) to clean up all loose solder, jumpers, cable jackets.

5) Turn off all lights.

Maintenance Log

Any maintenance, repairs, relocations, changes, etc to the area should be logged below with a note, date and who!

Note Date Who
Wiki entry created Nov 20, 2013 Thomas L.
area/soldering-bench.txt · Last modified: 2015/12/12 14:31 (external edit)